FINAL PU FOAM
- Pick up from the Final Branches
To pick up today
- Courier delivery
Our courier will deliver to the specified address
- DHL Courier delivery
DHL courier will deliver to the specified address
-
UPS Courier delivery
UPS courier will deliver to the specified address
-
FEDEX Courier delivery
FEDEX courier will deliver to the specified address
-
PTT Courier delivery
PTT courier will deliver to the specified address
Description
Final PU Foam, Is a multipurpose and single component polyurethane material that becomes hard with humidity.
Application areas:
Filling up the spaces and assembling doors and window frames. Filling of big cracks, holes, and spaces. Filling up the spaces at electronic and water installations. At the connection parts of the roof.
Progressing temperature:
15°C - 25°C (it is not recommended if the working temperature is under 50°C because the foam does not get harder. Surfaces: All surfaces should be dry, clean, and free from dust and grease. If necessary, use a primer. Porous surfaces should be pre-moistened with water.
Application:
Shake can 20 to 30 times vigorously before use. Screw the adaptor tightly into the valve. Use the can in the reverse position. Joints and cavities should only be filled 50%.
Cleaning:
Cured foam can only be removed mechanically or with a PU foam cleaner.
Color:
Beige.
Storage:
It must be protected against water, frost, and weather conditions. The shelf life can reduce if the can is stored above +30°C and under +5°C. It must be kept on wooden pallets and cool and dry conditions. You should keep it in upright position. The products that are opened must be consumed immediately. It should be stacked in a maximum of 6 layers. the product's storage time is 15 months if the protection conditions comply with the above subjects.
Safety:
Keep out of reach of children. The can should not be thrown into the fire. The foam should be used in well-ventilated areas. Don't smoke, protect your eyes and wear suitable protective clothes and gloves. This can is under pressure, and because of that it shouldn't be exposed to direct sunlight and shouldn't be heated above +50°C as there is a risk of bursting.
Technical Properties
30-20 kg/m3
-40℃ to 100
10 minutes
9 N/cm2 [DIN 53427]
5 N/cm2 [DIN 53427]
25-20%
4 N/cm2
100% & 200%
Max.1%
0.21 W/MK [DIN 52612]
201 cm/hour [high humidity]
