FINAL SILICONE GASKET MAKER
- Pick up from the Final Branches
To pick up today
- Courier delivery
Our courier will deliver to the specified address
- DHL Courier delivery
DHL courier will deliver to the specified address
-
UPS Courier delivery
UPS courier will deliver to the specified address
-
FEDEX Courier delivery
FEDEX courier will deliver to the specified address
-
PTT Courier delivery
PTT courier will deliver to the specified address
Description
Final Gasket Maker Silicone, Is an acetoxy-based insulation material, gets flexible at room temperature (RTV), strong to 330℃ temperature takes shape of the using place.
Applications:
Replaces cork, felt, asbestos, rubber, etc. Motors (intake manifolds, oil pans, valve covers, axle covers, thermostats, etc. Electric and electronic tools. Pipes, water installations, and these connections. Industrial ovens. At hot air cabals. joint places for vibration suction.
Colors:
Red, grey, black
Storage:
It must be protected against water, frost, and bad weather conditions. It must be kept on to the wooden pallets in cool and dry conditions. The open products must be consumed immediately. It should be stacked in a maximum of 6 layers. The product's storage is 15 months if the protection conditions shall comply with the above subjects.
Safety:
Keep out of reach of children. The application should take place in well–ventilated rooms so that cross-linker vapors can escape. During vulcanization, a total of 4% acetic acid is released thus these cross-linker vapors should not be inhaled in long periods or high concentrations. Avoid prolonged contact with skin. In case of contact with eyes, rinse immediately with water.
Technical Properties
11.03 g/cm3 [ISO1183]
-50℃ &+330℃
20 minutes
7hours for 2mm
20 [ISO 868]
0.7 N/mm2 [ISO 8339]
0.45 N/mm2 [ISO 8339]
%500
250 ml/minutes
between +5℃ to+40℃
