FINAL SUPER KLEBER
Back to products
NATURAL SPECIAL SILICONE (GREY)
Click to enlarge

FINAL HIGH TACK (MONTAGE KLEBER)

SKU: 2002
Compare
Add to wishlist
  • Pick up from the Final Branches

To pick up today

Requires coordination

  • Courier delivery

Our courier will deliver to the specified address

Requires coordination

  • DHL Courier delivery

DHL courier will deliver to the specified address

Requires coordination

  • UPS Courier delivery

UPS courier will deliver to the specified address

Requires coordination

  • FEDEX Courier delivery

FEDEX courier will deliver to the specified address

Requires coordination

  • PTT Courier delivery

PTT courier will deliver to the specified address

Requires coordination

Delivery Options

Description

Final FH100 is a hybrid polymer special adhesive. Suitable for bonding heavy materials without staples or tape. It offers excellent initial adhesion, very good final strength and is suitable for absorbent and non-absorbent substrates and materials. The adhesive is UV, water, weather and temperature resistant (-30°C to +80°C) and is therefore suitable for both indoor and outdoor use. Fast drying and silicone-free.

Application and Usage:

All substrates must be clean, dust-free, dry, load-bearing, grease-free and free from separating agents. Remove loose coatings and wallpaper if necessary. Apply the adhesive in strand form to the material to be bonded, immediately join and adjust and press on for approx. 15 seconds. Widely used for wall cladding, ceiling tiles, insulation, frames and decorative elements.

Technical Properties

Neutral cross-linking
Approx. 50 Density: approx. 1.50 – 1.60 g/cm3
Approx. +5°C to +40°C
Approx. -40°C to +90°C
About 10 minutes
Approx. 2mm/day

White

310ml

20

TDS

Download

MSDS

Download