MIRROR
FINAL MIRROR SILICONE
Back to products
UNIVERSAL
FINAL UNIVERSAL SILICONES
GASKET MAKER
GASKET MAKER
GASKET MAKER
Click to enlarge
GASKET MAKER
GASKET MAKER
GASKET MAKER

FINAL SILICONE GASKET MAKER

SKU: 1020
Compare
Add to wishlist
  • Pick up from the Final Branches

To pick up today

Requires coordination

  • Courier delivery

Our courier will deliver to the specified address

Requires coordination

  • DHL Courier delivery

DHL courier will deliver to the specified address

Requires coordination

  • UPS Courier delivery

UPS courier will deliver to the specified address

Requires coordination

  • FEDEX Courier delivery

FEDEX courier will deliver to the specified address

Requires coordination

  • PTT Courier delivery

PTT courier will deliver to the specified address

Requires coordination

Delivery Options

Description

Final Gasket Maker Silicone, Is an acetoxy-based insulation material, gets flexible at room temperature (RTV), strong to 330℃ temperature takes shape of the using place.

Applications:

Replaces cork, felt, asbestos, rubber, etc. Motors (intake manifolds, oil pans, valve covers, axle covers, thermostats, etc. Electric and electronic tools. Pipes, water installations, and these connections. Industrial ovens. At hot air cabals. joint places for vibration suction.

Colors:

Red, grey, black

Storage:

It must be protected against water, frost, and bad weather conditions. It must be kept on to the wooden pallets in cool and dry conditions. The open products must be consumed immediately. It should be stacked in a maximum of 6 layers. The product's storage is 15 months if the protection conditions shall comply with the above subjects.

Safety:

Keep out of reach of children. The application should take place in well–ventilated rooms so that cross-linker vapors can escape. During vulcanization, a total of 4% acetic acid is released thus these cross-linker vapors should not be inhaled in long periods or high concentrations. Avoid prolonged contact with skin. In case of contact with eyes, rinse immediately with water.

Technical Properties

11.03 g/cm3 [ISO1183]

-50℃ &+330℃

20 minutes

7hours for 2mm

%2

20 [ISO 868]

0.7 N/mm2 [ISO 8339]

0.45 N/mm2 [ISO 8339]

%500

250 ml/minutes

between +5℃ to+40℃

TDS

Download

MSDS

Download